|
| |
| Automatic Controlled Capacitor Banks |
Product Details:
Brand ABPOWER
Usage Outdoor Type
Automatic Controlled Capacitor Bank are used for centralised compensation of power factor in low voltage installations. AB power system also provides wide range of automatic capacitor banks with harmonic filters. These equipments are supplied completely assembled and are ready for use. It is only necessary to connect it to the mains with cable of adequate cross section, and to supply the operation signal from a suitable current transformer.
Automatic capacitor banks are composed of the following elements:
High Rupturing Capacity (HRC) fuses connected to a busbar system.
Contactors specially adapted to the work with capacitors.
Inrush current limiting inductances.(Optional).
Fast discharge resistors.(Optional).
Low losses power capacitors.
Reactive power controllers.
Terminals for neutral and ground conductors.
Metal cabinet containing all the switchgear.
|
|
|
|
|
| Automatic Filter |
Product Details:
Filter Type Multigrade Sand Filter, Activated Carbon Filters, Hydraulic Filter
Filter Medium Material Metal
Flow Rate (cubic meters/hr) 0-500, 500-1000
AB Lifasa supply Automatic Filter for installation having high levels of harmonic distortion. These banks are completely assembled and ready for use like Automatic control capacitor bank as explained above. The low cost, iron core, highly linear reactors of suitable ratings are provided in series with each capacitor unit. The tuning frequency of the whole unit is set at a value between the fundamental frequency and the frequency of the lowest present harmonics. AB Lifasa provides a wide range of ratings upto 3000 kva, 440 V with tuning frequency of 189 Hz. Other voltage and tuning frequencies are also available on request.
Features:
High performance
Excellent finishing
Highly reliable
MOQ : 100 KVA
|
|
|
|
|
| Automatic Power Factor Correction Panel |
Product Details:
Cable Entry Top, Bottom
Voltage 400 volt to 800volt
Rated Reactive Power 50kvar to 10000kvar
Application Type Chemical Industry, Cement Plant, Sugar Plant, Textile, Hospital
Abiding by the strict industrial norms and standards, we are providing the clients with an optimum quality assortment of Automatic Control Panel. It is also known as Programmable Logic Controller Panel.We are a unique entity in the industry, actively committed towards offering the best quality range of Automatic Control Panel. In synchronization with the set industry standards, this panel is exclusively manufactured under our highly experienced professionals using high grade electrical components, raw material and latest technology.Our quality controllers check the perfection of the series before the final send off.
Features:
Longer functional life
Efficient performance
Easy to maintain
Specifications:
Rated Voltage: 380-420V/500-690V
Rated Current: 32A-6300A
MOQ 25 kvar
|
|
|
|
|
| Capacitor Panels |
Product Details:
Application for power factor improvements,
Power 10kvar to 10000kvar
Phase Three Phase
We have a broad industrial range which includes the Capacitor Panels. The strong body structure of these panels enhances the life span and provides protection against external pressures. These panels are fitted in with best quality wires, steel and other material. Panels can be installed expeditiously and the maintenance required is less.
Features:
Highly reliable
Excellent finishing
Longer service life
MOQ 50 kvar
|
|
|
|
|
| Open Type High Voltage Capacitor Bank |
Product Details:
Power 300kvar to 10Mavr
Usage Outdoor Type
HT Capacitor Bank and Associated Equipment are used for centralised compensation of power factor in low voltage installations. AB Lifasa also provides wide range of automatic capacitor banks with harmonic filters. These equipments are supplied completely assembled and are ready for use. It is only necessary to connect it to the mains with cable of adequate cross section, and to supply the operation signal from a suitable current transformer.
Features:
High performance
Excellent finishing
Highly reliable
MOQ 300 kvar
|
|
|
|
|
| Passive Harmonic Filter With Thyristor Switching |
Product Details:
Usage power factor improvement
Passive Filter compensation equipments with electromechanical contractors, have a well proven performance in installation where the load has, slow variations and it is not very sensitive to voltage fluctuation. Today, however, more and more industrial installations, include electronic equipments that are very sensitive to voltage variations (PLC, computers, etc.) and also have very fast changing working cycles (automatic welding machines, robots, etc. ). Reactive power compensation with static contractors (Thyristor switch) offers the best answer to these new industry requirements. AB lifasa automatic capacitor banks with static contractors, use thyristors instead of traditional contractors. The thyristors switch-on capacitors on zero crossing voltage, and switch them off on zero current situation. The firing strategy grants a totally transient free switching of power capacitors, avoiding any problems with transient over voltages. This firing strategy grants a totally transient free switching of power capacitors, avoiding any problems with transient over voltages. This transient free switching gives a very fast reaction time of the power factor equipments with sudden reactive power demand variations. This reaction time (the time to switch on or off a capacitor step) is usually not higher than 20 milliseconds. This means that upto 50 operations per second are possible. Please see pdf file for advantages of Thyristor Switches over contactor Switching.
Features:
Longer service life
High performance
Excellent finishing
Specifications:
Type - Thyristor Switching
Size - Customise
Material - MS
Application - Industrial
MOQ 2 kvar
|
|
|
|
|
|
|
|
|
